用户评论

  1. 马可 · 说:

    大家好,. 我正在做一些测试与 NetModule 和工作很好, 即使我已经遵循的指示和 “复位” 在 "帮助" 中建议的三个命令的最后一个防火墙.
    NetModule 工作, 即使个人我设法得到它在任何汽车 SoftAP, 而不是在电台 DHCP. 也许我必须在路由器中设置一些东西 ?

    我对做工作感到满意。 3 项目 Thereminici 所有一起: Netmodule, NetHAL 和 Theremino 的声音. 实际上通过连接仅一个 LED (与秋天抵抗) NetModule 的数字 pin 立即实现 “无线语音激活指示灯”! 眼见为实!

  2. 匿名 说:

    我也尝试了 NetModule, 我去了第一个镜头轻松.
    我希望能够使用一个以上的模拟输入。. 和’ 购买表单以扩展输入 ?

    • 米尔科 trinca 说:

      据我所知, 他们正在工作, 以使用 adc-24 theremino 模块耦合到 netmodule, 但我认为这将需要几个月.

      • Paul 说:

        你好, 对于是否存在有关于使用的一些发展’ ADC-24与.netmodule组合? 我开始使用Theremino并有能力做到这一点似乎无线好

        • 里维奥 说:

          我们无法得到它去, ESP8266因为该芯片包含SPI通信的管理错误. 它不读取数据包的最后一位, 因为dell'ADC24芯片脱落太早数据. 在现实中,ADC24根据产品的特点进行操作, 但谁不正面看ESP8266, 因为它应该, 但有点’ 后.

          现在,我们正在尝试使用ESP32, 但也有磨合问题, 它仍然无法编译. 我们迟早会成功,但我不能告诉你需要多长时间.

          • Paul 说:

            谢谢; 友好. 我会尽量买施密特触发器匹配.netmodule, 那到底对于一些dataloggare’ 环境参数也应该这样做 (我不会做太频繁读数).

            再次感谢

  3. Geofaber 说:

    在网站上, 它描述了一个 “带有施密特触发器的 ADC” 做的目的, 以转换的数字输入在 Adc 也 NetModule , 虽然我还没有看到它在 ebay 和 thereminostore

    • 里维奥 说:

      写信给 Prakash thereminostore, 李在做这些天.

      但请记住, 你是 Adc 从 10 比特有限公司. 如此好读温度或读电位器调整某事. 但是如果你习惯了检波器很吵的话.

  4. 马可 · 说:

    我试着用小模块板上的组件做一个闪变仪 “手指心跳传感器” 凯斯, 我们为这个目的而工作 (检测节拍) 但作为接收器的组件似乎工作, 一旦拆卸, 作为光传感器检测闪烁.
    谁能告诉我, 如果他们是 phototransistors 或光电二极管?
    我没有发现在网络上没有这样的 moduletti 模式, 但假设组件为三极管 LTR 系列 (红外?) (引线: 红外发射器/集电极) 它似乎工作: 主接收信号并对其进行解码, 闪变仪表示合理的值。, 只是你要工作的低电阻值设置通过电位计.
    让我开始说, 我已经下令三极管指示 theremino.com, 但你知道…. 实验的欲望…!

    • 里维奥 说:

      如果你必须按住电位器低, 那么它肯定是一个三极管, 你也已经勾起了正确的.
      我们所说的晶体管, 你会有相同的结果, 所以, 如果你仍然不能得到他们.
      如果你总是用大量的光工作, 然后你必须保持电位器非常低, 很难调整它, 然后你可以用一个最低值替换电位计.

  5. geofaber 说:

    大家好,. 我试图使用应用程序 adc24 控制平衡两个尺度, 我很好.
    我检查了一段时间的漂移, 但我认为这是为细胞的质量
    我想你可以使用即使是紧张负荷单元类型 S 无论负载权 ? (我想我会尝试与细胞从 500 公斤).
    我似乎已经看到的机会, 以校准更多的点, 理论上, 我校准两个点, 其中之一是零, 如果我没有弄错. 另一种方法是不使用平衡, 使我一条线检查 mV 和重量 ?

  6. 说:

    我想开始与Theremino数控项目.
    我从鲍商店订购了主语, 通过贝宝所许.
    但我不明白,从鲍店内任何回答.
    我给他们发电子邮件几次, 没有任何反应,顺序仍在处理.
    我觉得我失去了我的钱.

    所以, 最好不要买有!

    • 里维奥 说:

      有肯定是一个错误, 该网站“存储鲍” (而不是“鲍店”为你写) 是完全安全. 请写信给我在“工程在theremino点com”和我会亲自照顾这. 我会马上与您联系并, 如果有一个错误, 你将有一些模块作为礼物.

      你好, 里维奥.

      这家商店,鲍网站是这里: https://www.store-ino.com

      • 说:

        今天,我终于收到了订单确认.
        我送邮件在他的垃圾邮件.
        感谢利维奥您的邮件,并帮助.

        格特 - 扬

        • 里维奥 说:

          还行, 谢谢你.
          我speaked与Lello (eBay的卖主叫maxtheremino) 并在下次做一个易趣订单时,您将收到一份小礼物. 您会收到易趣订单只有两三天,因为它们不是从茅根.

  7. 克林斯曼 说:

    你好,
    该项目theremino是伟大的!
    不幸, 我需要多个模拟输入,必须使用NetModul. 是否有可能到ADC24连接到NetModul?
    我在这里搜索, 但发现关于这个问题没什么. 还是我错过了什么 ?
    新年快乐
    美好的一天

    • 里维奥 说:

      该NetModule固件不能够连接Adc24,我们不会因为扩展的ESP8266的能力较差它. 但也有好消息告诉你!

      我们正在深化发展一个新的模块, 基于该Expressif ESP32. 新模块类似于我们的主 (通过USB连接), 并向NetModule (Wifi 上网), 并且也可编程为一个Arduino (通过Arduino的IDE). 此外,它是非常强大的 (32 位和 250 MHz) 并具有 26 在出销. 这也将连接到Adc24 (使用一个Arduino库).

      新IotModule将准备在未来三个月内,并具有以下特点:
      https://www.theremino.com/wp-content/uploads/files/Theremino_IotModule_Features.txt

  8. 劳伦斯基因Battin 说:

    刚刚下载Theremino MCA v 7.3, 它运行在Windows上 10 临64位,它总是崩溃. 当这个情况发生时, 主窗口的上面部分, (菜单区) 被替换为空盒两端大红色的X.

    错误窗口是由NET系统泛起, 并给出了以下理由:

    ************* 异常文本 **************
    System.ArgumentException: 长方形 '{X = 0,Y = 0,宽度= 0,高度= 27}’ 不能有一个宽度或高度等于 0.
    在System.Drawing.Drawing2D.LinearGradientBrush..ctor(矩形RECT, 颜色COLOR1, 颜色COLOR2, linearGradientMode linearGradientMode)
    在Theremino_MCA.Form_Main.ToolStrip1_Paint(对象发件人, PaintEventArgs的è) …..
    ———————————————————–
    下面的行删除,因为没有有意义的
    ———————————————————–

    • 里维奥 说:

      尝试这个:
      – 关闭MCA的应用.
      – 确保MCA的应用程序的,没有其他实例. 正在跑步
      – 删除文件 “Theremino_MCA_INI.txt” 它是应用程序MCA.exe附近
      – 启动应用程序. “Theremino_MCA.exe”

      如果在此之后,马华已经不工作, 那么你的电脑已经失去了一些DOTNET的DLL.
      尝试重新安装DOTNET的 3.5 或 4.0.
      还尝试另一台PC上

      在过去的五年里没有人报告了MCA的应用程序类似的问题.

      • 劳伦斯基因Battin 说:

        感谢您的建议. 删除工作文件. 我将在我与节目做什么,看看我是否能再现问题. 我也将重新安装DOTNET的 3.5 和 4.0 按照你的建议.

  9. 劳伦斯基因Battin 说:

    在您的网页 :
    https://www.theremino.com/en/video-e-notizie/video-and-images
    以下链接被破坏或不再指向视频:

    https://www.youtube.com/watch?v=bBG_m4akFts

    TOMY的YouTube频道 (https://www.youtube.com/user/crnazvijezda/videos) 似乎不再具有在所有的Theremino或核光谱任何视频, 尽可能靠近我可以做出来.

    所有的url的上市
    (www.youtube.com/watch?V = K1M9mlxc2cA
    http://www.youtube.com/watch?v = NXQRu ibuPqo)
    也缺席.

  10. 佛朗哥. 说:

    早上好, 我有一个WIN7 / 64位的hp笔记本, 如果可以的话,我想问一些资料: Behringer UCA202声卡与DAA兼容? 在二月份,我订购了您推荐的CM6206,但由于大流行,它从未到货,仍然给出交货时间 (来自中国) 至少两个月, 在这一点上,我不信任再次订购, 我在意大利发现Behringer相对较快. 非常感谢你能回答我, 无论如何,我祝贺你所做的非凡的工作, 祝福大家

    • 里维奥 说:

      你好, 所有声卡都兼容DAA, 因此Behringer UCA202也将确保正常工作.

      但是它很可能无法连续工作,或者在任何情况下我们都不知道如何以及是否可以对其进行修改以使其持续运行. 即使更改后它也不会稳定运行.

      因此,使用非推荐的卡片, 您将得到一半的范围,只能看到来自 10 Hz 起来.

      尝试问Lello (eBay maxtheremino卖家) 如果他能送你一个好人. 如果是这样,它将在三天内到达,并且可能已经过修改以便继续.

      在这里可以找到它:
      https://www.ebay.it/usr/maxtheremino?_trksid=p2047675.l2559

      或者在这里写:
      ufficiotecnico@spray3d.it

  11. 戴维·科西亚尼 说:

    Buongiorno a tutti e grazie per l’ottimo e gratuito lavoro per aver creato un software per programmare PIC col PicKit2.
    Io uso da oltre un ventennio solo GNU/Linux, per cui l’ho eseguito tramite Wine. Il programma parte e sembra funzionare tutto, putroppo Wine non supporta dispositivi USB, al che son dovuto passare con Oracle VM VirtualBox a Windows XPsp3 originale, ma se lancio PICkit2V2.exe winzozz mi dice:
    PICkit2V2.exe – .NET Framework inizialization error”, “Unable to find a version of thje runtime to run this application.”.
    Cosa posso fare?

    • 里维奥 说:

      Non so proprio, 对不起.

      Anni fa abbiamo tentato di far funzionare le nostre applicazioni si Linux e abbiamo trovato decine di problemi di questo genere. E dire che compilavamo in modo nativo, senza macchine virtuali.

      Dopo molti mesi di lavoro eravamo riusciti a far funzionare le due o tre applicazioni principali, ma andavano a stento e la grafica non girava in modo fluido. 然后, dopo circa un anno, hanno cambiato versione di Linux e non funzionava più niente.

      Per cui dovreste essere voi, gli esperti di Linux, a dire a noi cosa fare e non viceversa.
      I sorgenti li abbiamo pubblicati, fateli funzionare su Linux e li pubblicheremo subito.
      Vi abbiamo già preparato anche la pagina per Linux e quella pagina aspetta, da oltre dieci anni, che qualche esperto di Linux la riempia.

      —-

      P.S.
      NET Framework Error ?
      Immagino che hai già provato a installare il DotNet Framework.
      Se non lo hai fatto lo trovi qui:
      https://www.theremino.com/downloads/notes-on-software#requirements

  12. 唐·瓦尔奎斯特(Don Wahlquist) 说:

    I find the product interesting but there is no link on any of the download pages to download the basic spectrometer. All of the links are for customization. I do not understand why there is not a simple button to download instead a lot of text info and hype but no simple button to download. Is the products intention to create click bait and not to deliver any product. If this is the case you have succeeded. Please make a button at the top with the operating system required and then move to download.

  13. 唐·瓦尔奎斯特(Don Wahlquist) 说:

    More on the navigation of this website. To get to the download of the software you need to got to applications tab not the download tab. This seems counter intuitive to me. Good luck to users that want to download but Really NEED TO GO TO APPLICATIONS and then download.

    • 里维奥 说:

      I’m sorry for my lack of English but I don’t understand the problem well. Maybe you would like to shop from us? In this case I’m sorry but our system is non-profit and we don’t sell anything, we just explainhow to do it”.

      The download links are always found at the end of each chapter and are highlighted in light green.

      光谱仪是在这里:
      https://www.theremino.com/en/downloads/automation#spectrometer

      And the download links are at the end of the chapter, highlighted in green! Maybe you haven’t gone down enough to see them? They are right at the end of the chapter, before the new “OilMeter” chapter begins.

      If instead the problem was that you could not find the spectrometer chapter, then I inform you that in all our pages there is a “搜索” box (top left of each page). If you writeSpectrometerin that box, you will find it immediately, and you will also find all the other pages on our site that talk about it.

      There are also some useful options for english people:
      After you searched with the search text box you could use the right mouse button and selectTranslate in english
      With the right mouse button you can also translate the site pages.
      Or you can switch to the english site version using the box in the to right of each page.
      To search in a long page you could also use CTRL-F and search for exampleSpectrometer”, 或 “下载”

  14. 恩里卡 说:

    Hello there!
    Really great page!
    I have a question regarding geopreamp. Is there any substitude for LT6014 amp? I’m based in Germany and it seems like it is not possible to find it anymore. I’m also trying to look into the DIP version of the amp, not surface mount, so I could build just a simple circuitry. Maybe you have some suggestions?
    Thanks and kind regards!

    • 里维奥 说:

      Bitte benutzen Sie die rechte Maustaste und wählen SieIns Deutsche übersetzen

      Puoi trovarli da Mouser:
      https://www.mouser.it/Search/Refine?Keyword=LT6014

      Oppure anche da Amazon:
      https://www.amazon.it/LT6014AIS8-PBF-OPAMP-8SOIC-LT6014/dp/B01CFJRF10

      Oppure da DigiKey:
      https://www.digikey.ch/number/it/analog-devices-inc/505/LT6014/32816

      O da RS:
      https://it.rs-online.com/web/p/amplificatori-operazionali/5061050

      O da Analog Devices che li produce:
      https://www.analog.com/en/products/lt6014.html#product-samplebuy

      O dai cinesi, 例如在这里:
      https://www.ebay.it/itm/332496637985?hash=item4d6a581021:g:Hs8AAOSwbF1aPhOi

      Oppure l’equivalente MAX44248ASA da Farnell
      https://it.farnell.com/maxim-integrated-products/max44248asa/amplificatore-op-1mhz-0-7v-us/dp/2510870?rpsku=rel3:LT6014CS8PBF&isexcsku=false

      Oppure puoi scrivere a Lello che vende i moduli Theremino ADC24, i quali vanno anche meglio dei GeoPreamp.
      ufficiotecnico@spray3d.it

      La pagina dei GeoPreamp risale a circa dieci anni fa
      e nel frattempo abbiamo fatto l’ADC24 che va molto bene
      e che ha anche il guadagno regolabile da software:
      https://www.theremino.com/hardware/adapters#adc24

      • 恩里卡 说:

        Thank you for the reply!
        I’m more interested in building GeoPreamp, because I would like to use geophone as the listening device. It’s more for sound related project. I would use “信号” output of your circuitry as an audio source. The schematics of your circuitry I would like to transfer into the paper circuit, that’s why I was asking about more alternative options of LT6014 amp and possible DIP versions of it, not surface mount .) But of course I can also figure out something with surface mount version I guess, using SOIC to DIP converter :D
        Thanks for the links! I will have a look on them!
        亲切问候!

        • 里维奥 说:

          Per l’audio potresti anche utilizzare operazionali più comuni, 例如以下, che si trovano anche in case DIP (不贴片).
          MAX427
          LM833
          TS974
          TS464
          MAX 4475
          MAX 4476
          MAX 4477
          MAX 4478
          MCP6021
          MCP6022
          MCP6024
          LMC662

          E sono tutti con un rumore molto basso, anche più basso dello LT6014.

          Avevamo scelto lo LT6014 perché era adatto ai geofoni ma se li usi per l’audio tutto cambia. E molto dipende da che segnale manderai al suo ingresso. Magari un microfono Electret ?

          • 恩里卡 说:

            As an input I will use geophone! :) That’s why I want to build your preamp.
            I basically just would like to amplify the signal of the geophone, give an additional gain and bring the bandwidth in the range 0.2 – 180 Hz. As I understand from schematics the output would be the same signal from the geophone, just processed via all the components. So I actually could use it as an audio signal. I just would like to listen to vibrations loud :D Nothing too complicated :D
            You think in this case I could use any other low-noise operational amp (from the ones that you have mentioned above) instead of LT6014? Or should I stick to LT6014?
            Thanks for your reply and kind regards!

            • 毛里齐奥 说:

              Good Morning Erika.
              I seen in the past the geophone used as you want, in one artistic performance. 在这种情况下, the geophone was put in a big container filled with water, in order to collect more sounds, and create one ‘impedance adaptor’ (like when you are in the bathtub and you put your head under the water: you can listen many sounds from the house).
              The sounds was listened direcly, as you plan, but using headphones, in order to separate room noises.
              You say that you want to use the range 0,2 – 180 Hz.
              You onsidered that the human ear can’t listen below 20 Hz.
              You can use one upconverter, in order to shift the signal 20 Hz up, but I don’t know if the result will be good.
              Maybe is possibile for your purpooses to experiment using the binaural beat, only in headphones (https://en.wikipedia.org/wiki/Beat_(acoustics)#Binaural_beats), but this way don’t make the sounds really percepibles, only create this information into the brain.
              此外, this effect, despite is scientifically accepted, is not the same in all the persons and in all the situations.
              I founded only the italian wiki page for this.
              https://it.wikipedia.org/wiki/Toni_binaurali

              你好
              毛里齐奥

              • 恩里卡 说:

                你好! 感谢您的回复!
                Yes you are correct, I would like to use geophones as aninstrumentfor recording the sound and performing! :D
                Do you by any change remember the name of the performance you have seen? Maybe I could find something about it online :D
                About the range of 0,2 – 180 Hz I was thinking to add to the circuitry additional part that will translate the lowest frequencies into out hearing range.
                Binaural beats are great, would be interesting to experiment with a few geophones placed in a different places with that .)
                There is a very interesting product made my company LOM, where they converted the geophone into the vibrational pick up. I’m looking into some diy version of making something similar :D
                https://store.lom.audio/products/geofon?variant=29549909442647
                I think I could get pretty close to this geophone with building preamp that theremino proposed :)
                亲切问候!

            • 里维奥 说:

              你好, Sie können nicht nur die rechte Schaltfläche für die Übersetzung verwenden, sondern auch oben rechts auf jeder Seite die deutsche Sprache für die gesamte Website auswählen. Auf diese Weise sollten Sie alle Kommentare auf Deutsch sehen, auch wenn sie auf Italienisch oder Englisch geschrieben sind.

              答案
              是啊, l’uscita è esattamente uguale al segnale di ingresso ma amplificata.

              是啊, puoi usare qualunque altro operazionale che abbia un basso rumore di tensione di ingresso (lo LT6014 ha un rumore di 9.5 内华达州/sqHz)

              然后 (me ne ero dimenticato) per questo circuito ci vogliono operazionali Rail to Rail, per cui dalla lista che ti ho fatto ne restano di meno. Inoltre se li vuoi non SMD ma DIP8 ne restano ancora di meno.

              Ti consiglio quindi:
              MCP6022 da 8.7 内华达州/sqHz
              LMP7702 da 9 内华达州/sqHz

  15. 里维奥 说:

    无论您如何思考,言论自由都必须得到捍卫, 您也可能不同意某些观点, 但要找出答案,您必须先听取这些意见. 当然,在很多观点中,也有疯狂的观点。, 扁平人和相信美人鱼的人, 但在中间还有伽利略伽利略,我们一定不能失去那些!!!

    现在起 25 四月 2021, 您可以在运河上关注ByoBlu 262 地面数字,
    oppure in diretta streaming premendo su questo collegamento.
    https://www.byoblu.com/diretta-tv/

  16. 毛里齐奥 说:

    Buongiorno Erika.

    Rispondo in italiano perchè penso che Livio lo preferisca.
    L’impiego artistico del geofono che avevo visto risale a una installazione effettuata nel 2008 in una vecchia colonia per bambini, in un piccolo paese vicino a Genova.
    Il geofono era solo una parte dell’installazione, e non credo che siano disponibili informazioni.
    Gli artisti erano amici di un mio amico che purtroppo è deceduto, e quindi non saprei nemmeno come ritrovare i loro nomi. Se riesco a reperire informazioni le scrivo qui.
    Ricordo che si ascoltava in cuffia, e che alcuni rumori (come ad esempio il passaggio dei veicoli sulla strada adiacente) si sentivano contemporaneamente sia in cuffia che direttamente.
    Per questo motivo ho dei dubbi circa la trasposizione di frequenza, in quanto i suoni diventerebbero irreali.
    在任何情况下, a mio parere le informazioni sotto la soglia udibile dovrebbero essere percepite dall’osservatore come qualcosa di diverso dai suoni normamente ascoltabili.
    Oltre alla possibilità di convertire i suoni non udibili in battimenti binaurali, che non tutte le persone percepirebbero, potresti provare a convertirli in uno stimolo da associare ad altri sensi.
    Potrebbero diventare stimoli tattili, termici o luminosi.
    Oppure potrebbero far oscillare lentamente una pedana sulla quale far salire l’ascoltatore.

    你好
    毛里齐奥

留言

您的电子邮件地址将不会发布.