Novità e Aggiornamenti

Pagina delle novità

– – – – –

Fate scorrere la pagina fino alla fine
per leggere l’ultimo aggiornamento.

– – – – –

Per vedere le pagine precedenti si preme:
← Older Comments

Ci sono due “Older Comments
uno all’inizio, prima del primo commento
e uno a fine pagina.

  1. Livio says:

    Tutte le applicazioni del sistema avranno nuove icone, con lettere per distinguerle.
    Per vedere il testo delle icone nella barra inferiore di Windows, è necessario creare link alle applicazioni, sul desktop.

    Le seguenti applicazioni hanno già le nuove icone:
    HAL, ArduHAL, NetHAL, NetModuleProgrammer e SlotViewer

    Scaricatele da qui:

    Presto saranno pronti anche lo IotModule e lo IotHAL, qui ci sono alcune anticipazioni:

  2. Scott Watrous says:

    I just learned about this website while watching a DIY light spectrometer and i thought it was really outstanding!!! I have built the spectrometer and have a couple webcams that i am using in the build. When all assembled i see wonderful spectra from the webcam feed into my computer but i am not able to get the spectra to display in the spectrometer software. I read that it may be due to the type of driver the camera uses. I have been looking around for a used camera but i dont want to buy something that isnt going to work. I am hoping you could suggest a webcamera that i could find in the US that is known to work with your software. I am assuming that if the camera is on and displaying a nice spectra to the computer i just start the spectroscopy program and it should find the video feed from the camera. I have entered the camera model, resolution, and frame rate into the theremino program. THis is such an impressive looking spectrometer i am really interested in getting it working!!! Thank you!

    • Livio says:

      It should work with almost any USB webcam.
      Is your webcam a normal USB webcam?

      What happens after selecting the camera model, resolution, and frame rate into the theremino program?

      Try with another webacam, almost any USB webcam should work.
      If not you have another problem.
      Try with another PC.
      Try changing the webcam driver and selecting the “basic” microsoft driver.
      Do non install the webcam driver from the CD (they are always bad drivers, the microsoft driver works always but the CD drivers sometimes have errors)

Leave a Reply to Livio Cancel reply

Your email address will not be published.